|
|
Small solar power plant
Šimůnek, Patrik ; Kolouch, Jaromír (referee) ; Kubíček, Michal (advisor)
This bachelor thesis deals with the design of a small solar power-station utilizing a lead-acid battery. Its purpose is to provide power for small household applicances. This project consists of a theoretical design of the system, detailed design of MPPT regulator and a design of schematic circuitry and PCB. Finally, actual measured parameters of the whole systém are presented.
|
|
|
Bus wiring systems for complex building management
Mokrý, Lukáš ; Macháček, Jan (referee) ; Bátora, Branislav (advisor)
The aim of my thesis is to examine current opportunities of bus wiring systems for complex building management, mainly its power and economic evaluation. It can be simply called intelligent electrical installation. I will examine two systems from INELS and ABB company. These systems contain functional components, mainly modules and controllers. By means of other materials, I’ll create a panel. Components will be placed there and electrically connected. After this, systems will be put into operation and programmed by means of their software. The next step is measuring of quatities during the various conditions of systems and consumption, which is one of the main aims of the thesis. Two apparatuses will be used for measuring. This thesis itself will contain theoretical analysis of systems, their description, using the way of operation and main advantages and disadvantages. Single components and complete process of measuring and working in laboratory will be described. An overall evaluation and comparison of the systems from various points of view, including the price, will be put together from results.
|
|
|
Switch mode supplies
Kadlecová, Lucie ; Červinka, Dalibor (referee) ; Patočka, Miroslav (advisor)
In this bachelor‘s thesis is described the design and construction of switch-mode power supply with a pulse transformer. It is mainly focused on projecting and putting into practice of the basic functional elements - LC filter, pulse transformer, transistor converter, transistor drivers, rectifiers and control circutory, including experimental testing of the final product.
|
|
|
Power supply for acquisition and communication subsystem of a current transformer
Beran, Tomáš ; Král, Jan (referee) ; Kubíček, Michal (advisor)
This bachelor thesis is focused on designing a power supply for measuring part and communication part of a device, which is supposed to analyze current waveforms on high voltage lines. The power supply consists of a current transformer, control electronics, and accumulation elements. The thesis analyzes the current waveforms on high voltage lines to get an overview of input data so that the right current transformer can be chosen. A working principle of these transformers is described, as well as the options for accumulation elements. Power supply requirements for the power supply are determined as well. The next part of the thesis summarises this theoretical knowledge and applies it to the schematic design. This is followed by a description of the schematic with an included description of function blocks. Additional adjustments that would improve the power supply's properties might be mentioned. This will be followed by designing a PCB layout. The final part includes the manufacturing process and determination of parameters like power, efficiency, etc. In the manufacturing process, the PCB will be printed, soldered, and evaluated on an electrical test. The electrical test inspects the functionality of the designed power supply by simulating real-life scenarios of high voltage lines. At last, an impact of the power supply on the measuring system will be analyzed.
|
|
|
Class D power amplifier 2x 2 kW with switching power supply
Tylich, Ondřej ; Pazdera, Ivo (referee) ; Martiš, Jan (advisor)
The content of this thesis is a complete design of an amplifier working in class D, including a theoretical analysis. The thesis describes the functions of individual amplifier function blocks. The appropriate Class D amplifier topology is selected for the application. The design of the amplifier must correspond to the required power of 2x 2 kW to 4. The necessary calculations are performed to ensure the correct function of the amplifier. For reliability, it is necessary to select suitable terminal transistors. The thesis is a theoretical analysis of power supplies. Subsequently, a source with a suitable topology is designed, which will be designed to power the amplifier in class D. All necessary parameters are calculated, especially the power parts. The thesis deals with the design and complete implementation of the entire amplifier, starting with the design of the PCB and their production, subsequent installation, and recovery. After ensuring the function of all parts of the amplifier, various measurements are performed.
|
|
|
Wireless temperature sensor with high temperature warning indicator
Dvořák, Petr ; Petržela, Jiří (referee) ; Hruboš, Zdeněk (advisor)
This thesis deals with a proposal of a wireless temperature-sensitive element at high temperature. It analyses some different variants of the temperature sensors. Furthermore, the thesis describes the Industry Science Medical (ISM) bands, in which it will be possible to communicate with the wireless communication modules. These wireless modules are discussed and described. By the devices „the transmitter and the receiver" it is focused on the communication of the microcontroller Atmel with the wireless modules, with the temperature sensors, microswitches on the control and display unit (LCD).
|
|
|
The use of thermovision technology in output control of power supplies
Rejžek, Jan ; Slaný, Martin (referee) ; Polzer, Aleš (advisor)
The aim of the thesis is to clarify the issue of non-contact surface temperature measurement with a focus on the thermal imaging cameras as a modern representative of pyrometers and thermovision technology used in the output control of power supply. To obtain the corresponding results of temperature control, it is necessary to know the exact values of emissivity of the measured materials. The experimental part of this thesis is focused on detection of emissivity of power supply parts.
|
|
|
Precision audio preamplifier for headset measurement
Šimek, Michal ; Balík, Miroslav (referee) ; Hanák, Pavel (advisor)
This thesis deals with microphone and headphone preamplifier for microtelephone and headset. The design shall meet the electrical interface requirements set out in ITU-T Rec. P.381(08/2012). The design includes a voltage converter, microtelephone bias and both a battery and an external power supply. In this work is also described the design of printed circuit board and the solution of a low noise in the whole circuit. The aim of this thesis is to design, built and embed the laboratory fixture into a metal box. Finally, measure the product on an APx525 audio precision analyzer.
|
|
|
Uninterruptible Supply of the Hospital Information System
Kučera, Josef ; Sekora, Jiří (referee) ; Fedra, Petr (advisor)
This bachelor thesis is focused on the proposal for an appropriate source of uninterruptible power supply (UPS) to the school server UBMI where is currently installed HIS (hospital information system) CLINICOM Corporate SMS. UPS should have ensure the protection of data being unfinished, secure off site and to inform the line voltage failure.
|
|
|
Communication module for power supplies controlling
Zachar, Jiří ; Šmíd, Petr (referee) ; Dřínovský, Jiří (advisor)
The aim of this work is to design a communication module for laboratory source Manson. This power supply communicates only through a serial RS-232 link. Modern computers usually use for the connection with other peripherals mainly USB. Designed communication module contains converter between the RS-232 and USB. Power supply is used in the automated measurement setup, which is controlled from the Virtual Engineering Environment from the Agilent Technologies. Direct commands for laboratory source Manson are not compatible with the SCPI (Standard Commands for Programmable Instruments) standard commands. So, the communication module converts commands from the SCPI format to Manson supply instructions. The communication with the Manson supply will be obvious for students by using new communication module.
|
guest ::
